GP Series | Loaders | Miller Loader

gp-series

Address

1242 Arizona Ave
Larchwood, IA 51241

Phone Number

1 (800) 570-8205
1 (712) 477-2500

Basic Specifications	GP25	GP30
Loader Weight without Bucket or Mounts (lbs)	1,790	2,090

Tractor Requirements	GP25	GP30
Horsepower	80 - 175	100 - 260
Wheelbase	93 - 108	100 - 114
Operating Weight	Up to 15,000	Up to 17,000

Miller Loader Specifications

Technical Specifications	GP25	GP30
[A] - Max Lift height (in)	12'-11" (155)	14'-8" (176)
[B] - Max height under level bucket (in)	11'-10" (142)	13'-6" (162)
[C] - Clearance with bucket dumped 45 deg (in)	10'-2" (124)	11'-10" (142)
[D] - Reach at Max Lift and 45 deg dump (in)	28"	35"
[E] - Max dump angle (deg)	44	44
[F] - Reach on Ground with 35" deep bucket (in)	90	100
[G] - Bucket Rollback angle (deg)	32	34
[H] - Dig Depth (in)	6	6
Max Breakaway Lift Force with load 31.5" (800mm) ahead of Bucket Pivot Pin	5,900	7,400
Full Height Lift Force with load 31.5" (800mm) ahead of Bucket Pivot Pin (lbs)	4,900	6,000
Max Bucket Rollback Force with load 31.5" (800mm) ahead of Bucket Pivot Pin	8,000	7,400
All Specifications and graphs based on ASAE S301.3 Standard using hydraulic pressure of 3000 psi and load 31.5" (800mm) ahead of bucket pivot pin with general purpose bucket in horizontal position.